Contendo's Online Fall Awareness Course is intended to provide you with a comprehensive understanding of fall protection in the workplace. This course will cover a number of different facets of fall protection. We will look at the methods and equipment designed to prevent falls. We will also look at the equipment used to protect workers if they do fall. This…
WHMIS 2015 by Contendo will introduce materials, highlight their risks, and state the necessary precautions that need to be taken when handling them. It will also outline the requirements of producers or distributors of hazardous materials.
Contendo's Online Hazard Awareness Course has been created to teach you about Hazard Assessments. You will learn about identifying various types of hazards, how to assess them, and some of the methods used to eliminate or control those hazards. Having a good hazard management system in the workplace can significantly reduce, if not eliminate, many of the dangers found in…
PURPOSE The purpose of the Pad Steam System is to deliver high pressure steam from the Central Processing Facility to the well pads for use as injection steam, as well as pad utility and heating steam. LEARNING OBJECTIVES State the purpose of the Pad Steam System. Describe the system that is in place to isolate the high pressure steam pipeline…
PURPOSE The purpose of the Pop Tank is to accept relief and drain flows from well pad equipment and piping. LEARNING OBJECTIVES State the purpose of the Pop Tank, List the flows that are routed into the Pop Tank ,Describe the Pop Tank heating system, Explain how the Pop Tank level is monitored, And, describe how the Pop Tank is…
PURPOSE The purpose of this chapter is to discuss how process heat is recovered, and how liquids are condensed, from the produced gas stream in the produced gas condenser and trim condenser. LEARNING OBJECTIVES Describe the purpose of the Produced Gas system. Identify the source and components that make up the Produced Gas. Explain how heat energy is recovered from…
PURPOSE The purpose of the Produced Gas Separator is to remove liquids from the gas stream, in order to provide dry fuel gas to the Central Processing Facility Fuel Gas System. LEARNING OBJECTIVES Describe the purpose and design of the Produced Gas Separator, State the destinations of the 3 streams exiting the Produced Gas Separator, Describe how the liquid hydrocarbon…
PURPOSE The purpose of the Produced Water Cooling train is to reduce the temperature of the Oily Produced Water to a set point prior to entering the Skim Tank, to avoid flashing the Produced Water. LEARNING OBJECTIVES State the sources of the Oily Produced Water to be cooled, Explain why the Produced Water requires cooling prior to entering the Skim…
In the Contendo Fundamentals of SAGD Produced Water De-oiling course, you will learn how water recovered from the SAGD emulsions is processed to remove oil and solids, how precipitation softening is performed, and how the produced water is deaerated in preparation for use as facility Boiler Feed Water.
PURPOSE The purpose of the Produced Water Tank system is to hold Produced Water, and to supply feed water at specified pressure and temperature to the Hot Lime Softener, or HLS. LEARNING OBJECTIVES State the purpose of the Produced Water Tank system, Describe the Produced Water Tank gas blanket system, Describe the Produced Water Tank sampling system, Describe how separated…
PURPOSE The purpose of the Recycle Tank is to accept various oily water streams with intermittent or fluctuating flow rates, to provide oil skimming of separated oil, and to act as an equalization tank to provide stable Produced Water flow to the Skim Tank. LEARNING OBJECTIVES State the purpose of the Recycle Tank system, Describe why the Recycle Tank liquid…