PURPOSEÂ The purpose of the Flare system is to provide a safe means of collection and disposal for purge gases, waste products and relief vapors from the Central Processing Facility. LEARNING OBJECTIVESÂ State the purpose of the Flare system, State the main components of the Flare system, State why the Flare system must be continuously purged with fuel gas, Explain…
PURPOSEÂ The purpose of the Flash Gas system is to condense and recover steam and hydrocarbon condensate liquids from the vapor stream leaving the Flash Treater. LEARNING OBJECTIVESÂ State the purpose of the Flash Gas system. Describe how the temperature of the Flash Gas stream exiting the Flash Gas Condenser is maintained. Describe the Flash Gas Separator and its outlet…
PURPOSEÂ The purpose of the Flash Treater is to vaporize and remove water and light hydrocarbons from the slop oil stream to meet sales oil specifications. LEARNING OBJECTIVESÂ State the purpose of the Flash Treater, Describe how the Flash Treater produces sales quality oil, Describe how the flow of oil into the Flash Treater is pre-heated. Describe how the oil…
PURPOSEÂ The purpose of the Gas Boot Compression Package is to remove gas from the Gas Boot to maintain the low operating pressure in the Gas Boot necessary for stabilization, and to compress the gas for use in the fuel gas system. he purpose of the Gas Boot Compression Package is to remove gas from the Gas Boot to maintain…
PURPOSEÂ The purpose of the Gas Boot Condenser and Knock Out is to condense and remove liquids from the vapor stream that is recovered from the Sales Oil during stabilization. LEARNING OBJECTIVESÂ State the purpose of the Gas Boot Condenser Package. Explain why vapor cooling is required downstream of the Gas Boot Compressor. State where liquids removed from the Gas…
PURPOSEÂ The purpose of the Gas Boot system is to stabilize the dilbit stream to a specific temperature and pressure to meet Sales Oil specifications. LEARNING OBJECTIVESÂ State the purpose of the Gas Boot. State why it is important to cool the dilbit before stabilization. Explain why the dilbit leaving the Sales Oil Trim Cooler is under pressure control. Explain…
PURPOSEÂ The purpose of the Production Manifold and Group Separator System is to receive all the produced liquids from the production wells, to separate the field gas from the produced liquids, and to send the separate liquid and gas streams to the Central Processing Facility via the gathering system pipelines. LEARNING OBJECTIVESÂ State the purpose of the Production Manifold and…
PURPOSEÂ The purpose of the High Pressure Boiler Feed Water System is to supply treated high pressure boiler feed water to the Central Processing Facility Steam Generators. LEARNING OBJECTIVESÂ State the purpose of the High Pressure Boiler Feed Water system. Describe the low pressure and high pressure boiler feed water circuits. Describe the function of the Lube Oil Package provided…
